Operating Principles
         Inductive
         Capacitive
         Magnetic
         Photoelectric
         Connector Cord Sets

NEW Value Line Proximity
         Sensors


         Totalizing
         Preset
         Length Measuring
         Mechanical
         Multifunction

Timers


         Hour Meters
         Elapse Time
         Preset
         Multifunction


         Sensor Power Supplies
         Timing Controls
         Rotation Controls

 

 

30 mm Diameter Inductive Sensors


Types:

30mm Diameter DC 3 and 4 Wire
30mm Diameter DC 3 Wire "Short Series"
30mm Diameter DC 2 Wire
30mm Diameter AC 2 Wire

 

30 mm Diameter DC 3 and 4 Wire Inductive Proximity Sensor

 

 

Features:  
  • Short circuit & reverse polarity protection
  • Protection degree IP67: dust tight and protection from the effects of immersion
  • LED function indicator
  • 5 and 10 meter cable lengths available upon request
  • +100°C high temperature version available upon request

 
Model
Output Function
NPN, NO
S3470
S3474
S3110
S3114
NPN, NC
S3471
S3475
S3111
S3115
PNP, NO
S3472
S3476
S3112
S3116
PNP, NC
S3473
S3477
S3113
S3117
NPN, NO+NC
S3690
S3693
S3118
S3120
PNP, NO+NC
S3691
S3694
S3119
S3121

Dimensions: mm
1 mm = .03937"
1" = 25.4 mm

Operating Distance (Sn)
10 mm
15 mm
10 mm
15 mm
External Diameter
M30 x 1.5
Power Supply
10-30 Vdc
Max. Switching Current
200 mA
Power Drain (24Vdc)
< 15 mA
Voltage Drop
< 1.8 V
Short Circuit Protection
Yes
Operating Frequency
300 Hz
Repeatability (%Sn)
<= 3%
Hysteresis (%Sn)
< 10%
Case
Nickel-plated brass
Flush Mounting
Yes
No
Yes
No
Protection Degree
IP 67
Operating Temperature
-25 to +70°C*
Output Connection
Cable, L=2m
Connector C
*+100°C high temperature version available upon request

Wiring:    

Connector:  

Mating Connectors:
Model # Type Description
 
 
 
S3496/2
C
right angle w/ 2 meter cable
S3496
C
right angle w/ 5 meter cable
S3499/2
C
straight w/ 2 meter cable
S3499
C
straight w/ 5 meter cable
 
 
 
030502
C
right angle w/ enclose terminals
030503
C
straight w/ enclose terminals

 

 

30 mm Diameter DC 3 and 4 Wire "Short Series" Inductive Proximity Sensor

 

 

Features:  
  • Extended operating distance
  • Short circuit & reverse polarity protection
  • Protection degree IP67: dust tight and protection from the effects of immersion
  • LED function indicator
  • 5 and 10 meter cable lengths available upon request
  • +100°C high temperature version available upon request

 
Model
Output Function
NPN, NO
S3130
 
S3134
 
NPN, NC
S3131
 
S3135
 
PNP, NO
S3132
 
S3136
 
PNP, NC
S3133
 
S3137
 
NPN, NO+NC
 
S3680A
 
S3684A
PNP, NO+NC
 
S3682A
 
S3686A

Dimensions: mm
1 mm = .03937"
1" = 25.4 mm

Operating Distance (Sn)
15 mm
20 mm
15 mm
20 mm
External Diameter
M30 x 1.5
Power Supply
10-30 Vdc
Max. Switching Current
200 mA
Power Drain (24Vdc)
< 15 mA
Voltage Drop
< 1.8 V
Short Circuit Protection
Yes
Operating Frequency
300 Hz
200 Hz
300 Hz
200 Hz
Repeatability (%Sn)
<= 3%
Hysteresis (%Sn)
< 10%
Case
Nickel-plated brass
Flush Mounting
Yes
No
Yes
No
Protection Degree
IP 67
Operating Temperature
-25 to +70°C*
Output Connection
Cable, L=2m
Connector C
*+100°C high temperature version available upon request


Wiring:   Mounting:
NPN NO
X>= 4mm
15mm Sn only

X>= 10mm A>= 2D 20mm Sn only


Connector:  

Mating Connectors:
Model # Type Description
 
 
 
S3496/2
C
right angle w/ 2 meter cable
S3496
C
right angle w/ 5 meter cable
S3499/2
C
straight w/ 2 meter cable
S3499
C
straight w/ 5 meter cable
 
 
 
030502
C
right angle w/ enclose terminals
030503
C
straight w/ enclose terminals

 

 

30 mm Diameter DC 2 Wire Inductive Proximity Sensor

 

 

Features:  
  • Only 2 wires for easy installation
  • Short circuit protection
  • Protection degree IP67: dust tight and protection from the effects of immersion
  • LED function indicator
  • 5 and 10 meter cable lengths available upon request
  • +100°C high temperature version available upon request

 
Model
Output Function
NO
S3140
S3141
S3142
S3143
NC
S3144
S3145
S3146
S3147

Dimensions: mm
1 mm = .03937"
1" = 25.4 mm

Operating Distance (Sn)
10 mm
15 mm
10 mm
15 mm
External Diameter
M30 x 1.5
Power Supply
10-55 Vdc
Max. Switching Current
100 mA
Min. Switching Current
1.5 mA
Residual Current
< 0.6 mA
Voltage Drop (sensor on)
< 6.5 V
Short Circuit Protection
Yes
Operating Frequency
300 Hz
Repeatability (%Sn)
<= 3%
Hysteresis (%Sn)
< 10%
Case
Nickel-plated brass
Flush Mounting
Yes
No
Yes
No
Protection Degree
IP 67
Operating Temperature
-25 to +70°C*
Output Connection
Cable, L=2m
Connector C
*+100°C high temperature version available upon request
 
These inductive sensors contain an output amplifier with the function NO or NC that can pilot a load connected in series. In this system a residual current flows through the load even when in the open state and a voltage drop occurs to the sensor when it is in the closed state. Attention must be paid to these restrictions when selecting relays or electronic controls to be used with these sensors. They are adapted for inputs of PLCs.

Wiring:  

Connector:  

Mating Connectors:
Model # Type Description
 
 
 
S3496/2
C
right angle w/ 2 meter cable
S3496
C
right angle w/ 5 meter cable
S3499/2
C
straight w/ 2 meter cable
S3499
C
straight w/ 5 meter cable
 
 
 
030502
C
right angle w/ enclose terminals
030503
C
straight w/ enclose terminals

 

 

30 mm Diameter AC 2 Wire Inductive Proximity Sensor

 

 

Features:  
  • Protection degree IP67: dust tight and protection from the effects of immersion
  • LED function indicator
  • Extended operating distance available upon request
  • 5 and 10 meter cable lengths available upon request
  • +100°C high temperature version available upon request

 
Model
Output Function
NO
S3288
S3290
S3300
S3302
NC
S3289
S3291
S3301
S3303

Dimensions: mm
1 mm = .03937"
1" = 25.4 mm

Operating Distance (Sn)
10 mm†
15 mm†
10 mm†
15 mm†
External Diameter
M30 x 1.5
Power Supply
20-250 Vac
Max. Switching Current
300 mA
Min. Switching Current
5 mA
Max Peak Current (20ms)
1.5 A
Residual Current
< 1 mA
Voltage Drop (sensor on)
< 6 V
Operating Frequency
12 Hz
Repeatability (%Sn)
<= 3%
Hysteresis (%Sn)
< 10%
Case
Nickel-plated brass
Flush Mounting
Yes
No
Yes
No
Protection Degree
IP 67
Operating Temperature
-25 to +70°C*
Output Connection
Cable, L=2m
Connector C
* +100°C high temperature version available upon request
† extended operating distance available upon request
 
These are two-wire inductive sensors that contain a thyristor output amplifier in addition to the oscillator. Attention must be paid to the minimum switching current, residual current and voltage drop when selecting low consumption relays or high impedance electronic controls to be used with these sensors. They are adapted for inputs of PLCs.

Wiring:  

Connector:  

Mating Connectors:
Model # Type Description
 
 
 
S3496/2
C
right angle w/ 2 meter cable
S3496
C
right angle w/ 5 meter cable
S3499/2
C
straight w/ 2 meter cable
S3499
C
straight w/ 5 meter cable
 
 
 
030502
C
right angle w/ enclose terminals
030503
C
straight w/ enclose terminals

 

 




 
 
  Home            Specials            News            About Us            Literature Request            Contact Us
Copyright © 1998-2011 Fargo Controls Inc. All Rights Reserved.